Care tips

For fitted carpets covering the whole area, follow the spray-extraction procedure. For synthetic qualities and for wool qualities our Concentrated Carpet Cleaner is most suitable.

There you should use our Fresh Up 2in1 before the intensive cleaning. This tenside-free pre-cleaner dissolves dirt and stains.

Do not carry out wet cleaning ! This can lead to discoloration and shrinking in the carpet. Here our Dry Foam is suitable, or Carpetlife Powder (depending on structure)

Either follow the spray-extraction procedure with Concentrated Carpet Cleaner, or dry cleaning with Dry Foam.

By applying our Baygard carpet protection onto the moist carpet.

With our product Stain Guard. It impregnates the carpet and creates a lotus-effect.

Depending on the type of stain: Elatex, Floor Mate, Super Stain Remover R.

Alibaba

Apply our Fresh Up 2in1. It contains an odour absorber, which neutralizes bad smells.

Use our Anti Static Spray on your carpet floor.

With Dry Foam, Spray-Extractor machine using the upholstery nozzle and Concentrated Carpet Cleaner.

These materials are sensitive to moisture. Wet cleaning can lead to discoloration and shrinking (forming corrugation).

This is a case of older stain substances, or deeper lying dirt. These are partially dissolved by the Spray-Extraction. These substances are then mobile and are drawn up, like wax in a wick, to the tips of the pile, as soon as the carpet dries. As carpets, especially fitted carpets, dry from the base up (i.e. from bottom to top), it is the tips of the pile which dry last of all. When the carpet has dried completely, the dirt substances which were hidden at first can now be „drawn up“ to the surface (the tips of the pile). Such spots should be spray-extracted again, or a stain remover should be used.

PU Cleaner

Floor Shine / Floor Mat / Design CareSet+

Clean & Strip

Floor Shine, Floor Mat, Care & Floor Cleaning Set for PVC/Lino (gl./m)

White: polishing pad, scratch-free, for removing stains
Green: basic cleaning pad, slightly abrasive, for removing layers of care products, used together with Clean & Strip

Elatex Universal Stain Remover

Optimally with the Polish Applicator. Alternatively also with a fluff-free mop, but not with a floor-cloth (risk of streaks and stripes forming)

This often arises from an overdose of the product used for maintenance cleaning. In such a case the floor should be washed with clear water several times, in order to dissolve the water-soluble remains, or the floor can also be polished out with a machine (e.g. Floorboy, white pad)

For this purpose you can use PU Cleaner undiluted with a white pad. Alternatively also Elatex.

In general such floor coverings should only be mopped with a slightly damp mop, avoiding any pools forming. This also applies to parquet, wood, cork and laminate floors.

Use a mop cleaner like Floor Cleaner R 1000.

Use Clean & Strip 1:3-1:5, water the grouting beforehand.

With Inolit Aktive Powder.

No, only Stone Care should be used for maintenance cleaning.

After basic cleaning with Clean & Strip you can freshen up the marble floor again with Floor Shine.

Intensive Cleaner for Wood+Cork. Undiluted on sealed wood/parquet, 1:1-1:3 on oiled surfaces.

Sealed floor: Wood+Cork Shine/Matt Oiled: H2Oil, Premium CareOil.

Generally: vacuum-cleaning and mopping to bind dust. Mopping with a slightly damp mop with Wood+Cork Cleaner (sealed floors), with Wood Care (oiled floors).

Sealed floor: Wood+Cork Cleaner undiluted +white pad Oiled: Wood Care undiluted +white pad Stubborn stains with the Intensive Cleaner for Wood+Cork, or Elatex (test the material compatibility beforehand!)

With Wood Care White and the Premium CareOil+White paste.

The cause of this can be too small an amount applied (one 750 ml bottle is sufficient for approx. 30-35 sq.m). The product was polished in and formed streaks as a result. The wrong machine was used to apply initial care, therefore it left mop traces and streaks. Optimally use the Polish Applicator for initial care, alternatively with a clean, fluff-free mop.

Due to the regular use of the care product, layers of it have built up. After a longer period these should be removed again, using Intensive Cleaner for Wood+Cork with a white pad. An oiled floor looks grey after a certain time. Why is that? Every time the floor is mopped, oil is taken from it. Therefore cleaning should be carried out using only a slightly damp mop, and the floor should be regularly oiled afterwards. For this purpose our H2Oil (water-based) is suitable, as is our Premium Care Oil (solvent based).

Laminate Cleaner undiluted or Elatex.

This is often a case of too high a dose of the cleaner. in such a case it helps to polish out the laminate dry with a white pad +Floorboy, or mop the floor several

Every time the floor is mopped, oil is taken from it. Therefore cleaning should be carried out using only a slightly damp mop, and the floor should be regularly oiled afterwards. For this purpose our H2Oil (water-based) is suitable, as is our Premium Care Oil (solvent based).