Resilient flooring with a polyurethane factory finish or treated with PU Sealer/Waxnomor, Antislip or Anticolor/Marknomor.
Cleaning after installation:
Remove coarse dirt using a brush or vacuum cleaner. In case of stubborn dirt,
dilute PU Cleaner/Schutz Cleaner in a ratio of 1:10 (1 litre to 10 litres of water), reducing the concentration accordingly for slight soiling. Distribute the cleaning solution over the floor and, after allowing to stand for a short time, treat the floor surface using a Monodisc appliance and red pad or scrubbing brush. Take up the dirt using a Spray extractor fitted with a hard floor adapter or absorbent wide-headed wiper mop and wipe over with clearwater to neutralise.
Consumption: approx. 1 l = 50- 100 m²
Dilute PU Cleaner/Schutz Cleaner in a ratio of 1:200 (50 ml to 10 litres of water) and wipe over the floor
using this solution. The concentration can be reduced to 1:400 (25 ml to 10 litres of water) when using a fully automatic cleaning appliance.
Consumption: 1 l = 1000 m²
Product Information & Consumption
Sensitive surfaces (such as wood, metal, furnishings) should not be sprayed with the cleaning solution.
approx. 1 l = 50- 100 m²(Cleaning after installation)
1 l = 1000 m² (Daily Cleaning)